SALE!

eBP SKU: BATC-EBP-36V72V-40A-BLU

eBike Parts Battery Combiner (eBC) for 36V – 72V

Get more Range, more Power, and extend your Battery Lifetime!

Tired of range anxiety? A simple solution is to add a second battery (with the same Voltage). To safely connect two batteries together you need more than a cable, you need this simple device.

Here are the benefits:

  • More Range: When your battery allows you to drive 35 km adding a second same battery will not only double the range, but even more a surplus 10+ % is feasible: in combination with the eBP Battery Combiner you will get easily 80+km out *
  • Full use Motor Power: two batteries will deliver power to your motor. Together they provide optimum acceleration and it will optimize your motor performance by delivering a more stable voltage and reducing battery sag.

How to use a Battery Balancer:

  1. Always combine two batteries with the same VOLTS (as example: 36V-36V or 48V-48B or 52V-52V etc).
  2. You can combine any Ah you want: 48Volt- 14Ah battery with a 48 Volt – 20Ah battery.
  3. You cannot use a Battery Balancer when you have a regenerative braking system (can damage electrical components like the display, controller, etc.).

Technical:

  • Input (from battery to combiner): min. 36V – max. 72V
  • Output (from combiner to controller): min. 36V – max. 72V
  • Output max. 40A
  • Input connectors (from battery to combiner): XT-60H female
  • Output connector (from combiner to controller): XT-60H male
  • Size: 72mm x 45mm x 18mm
  • Weight: 147 grams
  • Cable length: 75mm

* How much you get out of your battery, and how extra range you will get out of your dual battery setup depends on the total weight, terrain, and wind conditions. But be assured, you will ALWAYS get more range with two batteries and the eBP Battery Combiner.

Original price was: 75.00 $.Current price is: 59.00 $.

Description

  • Supports connection of two batteries at once
  • Intelligent load management ensures two batteries safely deliver 36, 48 or 52 volts to your controller

eBP Battery Combiner – Connect 2 Batteries to Increase Range, Power, Speed & Battery Life

  • eBP Battery Combiner means: “Combine your batteries to produce more power and more range”
  • The eBP Battery Combiner  allows you to safely connect 2 batteries in parallel
  • All connected batteries can be used at the same time while riding

What Improvements Can You Expect?

🔋 RANGE

  • Example from real-world testing:
    • 1 battery = 40 kilomiles
    • 2nd battery = 40 kilomiles
    • Using both together with the eBP Battery Combiner = up to 90 kilomiters total range
  • Test conditions:
    • Flat terrain
    • Same route
    • Same rider
  • Note:
    • Actual range depends on multiple factors (terrain, rider weight, riding style, weather conditions, etc., etc.)

⚡ AVERAGE SPEED

  • When riding with 2 batteries:
    • Voltage sag (voltage drop under load) is reduced by 50%
    • Example:
      • With 1 battery: 6V voltage drop
      • With 2 batteries: 3V voltage drop
      • Meaning less waste of energy = more range
  • Result:
    • You will typically ride 3V to 4V faster compared to using only 1 battery
    • Meaning a bit higher topspeed (don’t expect high speed improvements)

🚀 POWER OUTPUT

  • The additional 3V to 4V also increases available power:
    • 3V × 30A = 90W extra power
    • 4V × 30A = 120W extra power
    • Meaning: more range.

🔋 EXTRA RANGE (BY LOWERING CURRENT)

  • If you slightly reduce the maximum current:
    • Example:
      • From 30A → 28A
  • You can achieve:
    • The same power output as before
    • More total riding range

⚠️ IMPORTANT – REGEN MOTOR COMPATIBILITY

Before installing an eBP Battery Combiner device:

  • Check if your bike or motor supports REGEN (regenerative braking)

Why this matters:

  • eBP Battery Combiner devices:
    • Only allow batteries to discharge
    • Do not allow batteries to:
      • Communicate with each other
      • Accept current generated by the motor/controller
  • REGEN systems:
    • Send power back into the battery during braking

Using both together may:

  • Generate higher voltage spikes
  • Cause damage to:
    • Controller
    • Display
  • Potentially fry electronic components

❌ NOT COMPATIBLE WITH:

  • REGEN motors
  • REGEN controllers

✅ COMPATIBLE WITH:

  • All non-regen eBikes

You can safely use eBP Battery Combiner devices on non-regen eBikes to enjoy:

  • Increased range
  • Higher average speed
  • More available power
  • Improved battery life cycles

 

Summarised:

With the eBP Battery Combiner you can SAFELY connect two batteries to your controller of your eBike. The system prevents discharging one batetry into another when there is a difference in Volts. A discharge of a battery with high Amperes into another battery goes so quick through the cables into the another battery, that due the resistance of the plugs, cables and other electronics it will heat up and can cause fire.

❌ ❌ ❌WARNING NEVER connect two Batteries with each other (in parallel) to a eBike Controller without this simple and affordable device. Safety first ! Y-splitter cables or any other combining connecting cables for two (or more) batteries are dangerous and can cause irreversible damage to your batteries or even whole electronics of your eBike. ❌ ❌ ❌

 

Additional information

Weight0.15 kg
Dimensions7.2 × 4.5 × 2 cm
Colour

Blue (dark)

Plug

XT60 Female, XT60 Male

Battery Size / Capacity

36V / 20Ah, 48V / 16Ah, 48V / 19.2Ah, 48V / 20Ah, 52V / 17.5Ah, 52V / 20Ah, 52V / 21Ah, 52V / 25Ah, 72V / 20Ah

country_of_origin

CN

hs_code

8714910000

Share a link to this product

Facebook
Pinterest
WhatsApp
Email
Reddit